Use drill bit stop collars to preset the depth you intend to drill to so you don’t drill through your parts. These are great for helping drill the right depth for your magnets.

This set contains the following drill bit collars and is sold separately from the drill bits.

3mm

4mm

5mm

6mm

8mm

10mm

12mm

Totaling 7 collars plus 1 hex wrench.

RGG Mounting Putty 15 grams. Neutral Gray. Safe and Easy to Use.

Designed for use with RGG Painting Handle 260 Definitive Edition.

Mount all your plastic, resin models with ease. Works best with RGG 360 degree painting handle. To preserve the mounting putty, keep it covered. Restore the mounting putty by rolling it between your fingers or replace if needed.

Made in PRC.

Red Grass Sprue Cutters. For plastic and resin. Clean cut, long lasting. For miniature, model kits, or craft.

Made to last, the Redgrass Sprue Cutters are designed to remove miniature and scale model parts from sprues. The Redgrass Sprue Cutters are the perfect combination between versatility and durability. They will serve you for years with proper care!

Avoid cutting with the tip of the cutters. Use the middle or end section of the blades for a clean cut.

Caution! Extreme sharp edge. For plastics (PS, PP, ABS, PE) and resins. Do not exceed 3mm. Do not drop. Use the protective cap for optimal safety. Keep tool away from humidity. Ages 14+

Tamiya brand basic type putty. Net weight 32 grams. Item 87053
This putty is designed for use with plastic models. Before curing, it can also be thinned with Tamiya Lacquer Thinner. Use for repairing and modifying plastic models. This putty can also be used for repairing and covering surfaces of metal and wooden models.

Wipe surface clean of dust, oil, etc. Apply using spatula type tool. After curing, shape the surface using a modeling knife or Tamiya Finishing Abrasive. If putty becomes thin, apply an extra layer. Clean tools with Tamiya Lacquer Thinner.

Warning: Flammable liquid, contains organic solvents. Prolonged and/or repeated contact may cause irritation and/or dermatitis. Ingestion may cause harmful effects. Direct contact with eyes may cause irritation and even serious injury. Direct contact with skin may cause irritation. Inhalation of vapors may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and under conditions of overexposure even death. Ages 14+

Avoid contact with eyes and skin. Avoid inhaling vapors. Use in well ventilated area. Do not use with bare hands. Apply the putty with a spatula by using appropriate gloves. Do not use near open flame and near heat source. Wash hands after use. Keep out of reach of children. In case of eye contact, wash eye immediately with plenty of water and get medical attention. In case of skin contact, wash skin with soap and water. If swallowed, call poison control at 1-800-222-1222.

Conforms to ASTM D-4236.

Tamiya brand white putty. Net weight 32 grams. Item 87095
This putty is designed for use with plastic models. Before curing, it can also be thinned with Tamiya Lacquer Thinner. Use for repairing and modifying plastic models. This putty can also be used for repairing and covering surfaces of metal and wooden models.

Wipe surface clean of dust, oil, etc. Apply using spatula type tool. After curing, shape the surface using a modeling knife or Tamiya Finishing Abrasive. If putty becomes thin, apply an extra layer. Clean tools with Tamiya Lacquer Thinner.

Warning: Flammable liquid, contains organic solvents. Prolonged and/or repeated contact may cause irritation and/or dermatitis. Ingestion may cause harmful effects. Direct contact with eyes may cause irritation and even serious injury. Direct contact with skin may cause irritation. Inhalation of vapors may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and under conditions of overexposure even death. Ages 14+

Avoid contact with eyes and skin. Avoid inhaling vapors. Use in well ventilated area. Do not use with bare hands. Apply the putty with a spatula by using appropriate gloves. Do not use near open flame and near heat source. Wash hands after use. Keep out of reach of children. In case of eye contact, wash eye immediately with plenty of water and get medical attention. In case of skin contact, wash skin with soap and water. If swallowed, call poison control at 1-800-222-1222.

Conforms to ASTM D-4236.

DSPIAE 2x 75 millimeter x 10 millimeter Aluminum Alloy Sanding Boards and 2x 75 millimeter x 5 millimeter Sanding Boards.

This board is made of aluminum alloy, which is waterproof and anticorrosive. The surface is treated by oxidation sand blasting to avoid the phenomenon of residual glue. With DSPIAE's self-adhesive sand papers, get your works done easily and effectively.

Ages 14+. Self Adhesive Sandpaper not included.

DSPIAE 3x 75 millimeter x 25 millimeter Aluminum Alloy Sanding Boards.

This board is made of aluminum alloy, which is waterproof and anticorrosive. The surface is treated by oxidation sand blasting to avoid the phenomenon of residual glue. With DSPIAE's self-adhesive sand papers, get your works done easily and effectively.

Ages 14+. Self Adhesive Sandpaper not included.

Contains 1mm markings for scale

For creating new panel lines (panel lining/scribing)

This file is made of tempered glass, please do not drop/throw to avoid cracking and breakage which may cause malfunction. Store in protective plastic case after use, avoid clashing with other sharp objects. Do not use it to polish metal or other hard materials to elongate the service life. Clean with fresh water after use to regain sharpness.

This file is made of tempered glass, please do not drop/throw to avoid cracking and breakage which may cause malfunction. Store in protective plastic case after use, avoid clashing with other sharp objects. Do not use it to polish metal or other hard materials to elongate the service life. Clean with fresh water after use to regain sharpness.

This file is made of tempered glass, please do not drop/throw to avoid cracking and breakage which may cause malfunction. Store in protective plastic case after use, avoid clashing with other sharp objects. Do not use it to polish metal or other hard materials to elongate the service life. Clean with fresh water after use to regain sharpness.

Bandai Spirits Official Tools. Model Sanding Stick Set of 3. 1x #400, 1x #600, and 1x #1000 grit.

Clean up gate markings. The sanding sticks can be used immediately! The normal-size sticks can be used to efficiently sand wide areas.

Bandai Spirits Official Tools. Mini Model Sanding Stick Set of 9. 3x #400, 3x #600, and 3x #1000 grit.

Clean up gate markings. The sanding sticks can be used immediately! The mini-size sticks can be used for narrow areas.

holds miniature bases from 25mm wide up to 40mm wide

1.5 millimeter stick diameter BB-15. 6 pieces. Brass bars for modeling.

The cut brass bar has a sharp fracture. Please be careful to avoid injury. It is forbidden for children under the age of 14 to use this product to avoid injury. Do not use professional model nipper to cut brass bars to avoid blade breakage. As the brass bars are thin, it is prone to deformation. Please operate with caution.