Venice has been sinking for many years, but no where more than San Canciano. The sunken district toppled into the water, and seemingly no one wants to pick it back up again. Not a problem, because it makes a great setting for your games!

Containing two large sunken buildings, this set helps to fill up your open canals with some collapsing casas or palazzos. The rooftops make a great space to fight over.

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Venice has been sinking for many years, but no where more than San Canciano. The sunken district toppled into the water, and seemingly no one wants to pick it back up again. Not a problem, because it makes a great setting for your games!

Containing three sunken buildings, this set sacrifices height for coolness! Although the buildings have fallen at odd angles, they're positioned carefully so that your models have a nice, flat surface to sit on top of.

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Venice has been sinking for many years, but no where more than San Canciano. The sunken district toppled into the water, and seemingly no one wants to pick it back up again. Not a problem, because it makes a great setting for your games!

The Sunken Tower is a true centrepiece for your board. Toppled over, it's split apart which allows for handy climbing spots! The entire tower has collapsed onto another building, and both have loads of flat surfaces so your models will be safe (even if the characters aren't in-game).

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

A double-sided pitch and dugout set with a reduced size provides players with two pitches for the fast games of Blood Bowl Sevens, the rules of which can be found in Death Zone.

17ml bottle of Airbrush Flow Improver from Vallejo.

Medium to improve the flow and delay the drying of paint on the needle. We recommend adding 1-2 drops of flow improver to 10 drops of paint.

TTCombat Paint Shelves are a great way to store and organise your paints. Each one is designed to hold a specific type of paint. Our Citadel Paint Stand is designed to hold 72 pots of Citadel paint. The top row can be used to store up to 8 of the larger 24ml pots and the rest of the shelves are able to store up to 64 Citadel 18ml pots.

Designed to be as easy to assemble as possible, you'll be able to organise your painting area in no time at all.

Made from 3mm MDF and supplied flat. Assembly is required and we recommend using PVA glue for the best results.

The Convent Ruins is a multipiece kit, that would look great on your war table! Whilst once a home of prayer, it's now the place to hold the line with your troops! Each part offers excellent line of sight blocking and with extra floors, you can gain the holy ground, aka the high ground! Consisting of multiple structures, this kit is perfect to be condensed as one building or spread out to cover more of your board! The decision is yours.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Sector 2 - Slum Shanties set contains four individual pod buildings, stairs and various walkways to connect them.

The set is completely modular, allowing you to build your own shanty town in any way want. The buildings stack on top of one another as well as being able to connect side by side with the walkways, giving you the choice to build tall or build wide. The hab-pods have been designed with playability in mind, there is enough room on the gantries to move your models around with the angles of the buildings providing cover as well as adding to the warren like feel of this kit.

The Sector 2 - Slum Shanties are compatible with all the other Industrial Hive kits, and the buildings in every kit in the Sector 2 range are stackable and connectable, meaning you can make a sprawling network of buildings, sky scrapers and more! .

The set contains:

• 2 Square platforms with a Triangular base
• 2 Triangular platforms with a square base
• 2 Stair sections
• 1 Pylon
• 2 Large platforms
• 2 Small platforms
• 12 Railing clips
• 1 Barricade
• 6 Modular supports
• 4 Lamp clips

This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. Find Tabletop Scenics Instructions at TTCombat.com

The Sector 2 - Slum Warren is perfect as the ground floor to a sprawling city above. Its modular, stackable and triangular platforms are vertically compatible with the other Sector 2 kits and horizontally compatible with the rest of the INH range. Enabling you to create a dystopian industrial future city of your choosing.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to make your games in the sprawling Industrial Hive more fun than ever.

The set contains:

• 8x triangle platforms (2x with Stairs)
• 3x large platform
• 2x small platform
• 16x modular supports
• 3x barricades
• 16x railings
• 15x lamp clips

The Slum Warren is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Ruined Convent Ambulatory is a versatile piece of scenery for your table. With multiples levels and those all important yet convenient remaining walls, these ruins offer plenty of line of sight blocking and ambush point. A great resting point for weary troops regroup!

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Convent Pulpit is a great piece of scenery for your table. Multi-level, barriers for hiding behind and under building hiding spots to. It may be damaged but its far from destroyed. Easy to assemble and perfect for a battle torn tabletop.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Convent Ambulatory is a great piece of scenery for your table. Not only does it block line of sight for your troops to hide behind, but it also has roof access for gunning down your foes from an elevated position. The set features a removable roof, which means it's easy to assemble. For the interior, some seats are provided and for the exterior, fences. Perfect for cover.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Convent Pulpit is a great piece of scenery for your table. Not only does it block line of sight for your troops to hide behind, but it also has a raised platform (accessible via steps - none of this ladder nonsense) with barriers for gunning down your foes from an elevated position. Or lecturing them with a sermon - your choice. The set features a removable roof and stage, which means it's easy to assemble and can be spread out to cover even more of your board.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Church is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Malifaux . Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Please note that due to the age of this kit, instructions are unavailable. We recommend dry fitting before assembly and referring to any images on the product page. Any models shown in the photos are for scale only and not included.

6 faction specific paints - Antique Gold, Metallic Pewter, Red 4, Ochre 4 contrast, Brown 4 contrast, Flesh 3

6 faction specific paints -Flesh 5 contrast, Warm Grey 3 contrast , Metallic Pewter, Emerald 4 contrast, Brown 3 contrast, Blue Grey 3 contrast

6 faction specific paints - Blue 5 contrast, Olive Shade, Flesh 5 contrast, Ochre 1, Antique Gold, Emerald 5 contrast

The Shaltari battlesuits strode confidently down the boulevard. Armoured from head to toe (and those weren't even their actual heads or toes), they were a sight to behold. That is, if the sergeant didn't know firsthand just how deadly they were. He stole one more glance before darting over the rubble and - hopefully - out of sight.

This set contains a whole bunch of urban style Dropzone infantry bases. All kitted out with 3 holes, they're perfect for Shaltari players or anyone looking to take some Exotic infantry in their armies.

Modelled after a city environment, these bases provide a great template to apply extra detailing and bits of rubble to your heart's content!

Contains 18 random resin bases in 3 different styles. Miniatures supplied unpainted and unassembled, with extra texturing not included. This kit will require cleaning and assembly, and could need some small holes filled. We recommend a liquid putty or textured paint to help get a perfect fit for your models.

"Move it Jenkins!"

"I can't, ma'am, my feet are stuck to this massive rock!"

For when tearing off the basing scheme on your infantry just isn't enough, this base pack is exactly what you need to re-base your Dropzone Commander infantry.

Made from plastic, this pack has 16 five-hole infantry bases and 8 three-hole infantry bases. They come unpainted, and while they don't require assembly, may require some cutting and cleaning.

8 Large clear acrylic flight stands with polished edges suitable for Dropzone Commander. Also includes 8 widgets.

Note that clear acrylic bases may have a coloured peelable protective film.

Base: 40mm x 40mm x 3mm

Stem: 70mm x 3mm diameter

Widget: 7mm x 5mm outer diameter with 3mm diameter outer plug

The widget is a simple yet elegant solution to the problem of moving your aerial models around safely and securely. Simply glue the widget to the underside of the model and it will provide a high grip push-in plug for 3mm flight stand poles. The model won't wobble during games, and the flight stand can simply be pulled from the widget at the end of your games, allowing the stand to be packed separately.