Bandai Namco. Ages 6+.

It comes with a pedastal!

Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

30MM 30 Minute Missions Armored Core VI Fires of Rubicon. 8+. Option Parts Set 04 Weapon Set 04. Weapons
Contains

• DF-GA-08 Hu-Ben Gatling Gun
• DF-ET-09 Tai-Yang-Shou Explosive Thrower
• BML-G1/M20MLT-04 Missile
• BML-G2/P17SPL-16 Split Missile

Other products sold separately.

1/1000 Scale Ages 15+
Banda Namco
Bandai Spirits 2024

Bandai Spirits Entry Nipper (Red). Bandai Namco. Made in Taiwan. S-50C High Carbon Steel. Hardness HRC45-50. Cutting Capacity plastic 1mm. Surface treatment Blackened (parkerized surface).

Apply the blades and cut at a position slightly away from parts. Apply the blades right next to the parts to remove gate marks.

Nippers have sharp tips and edges due to their functionality and can be dangerous. Keep out of reach of children under six years of age. This product is not an electrically insulated tool. Do not cut wires or other electrical appliances. Please use protective goggles for safety when using the product Please be careful of parts that fly off when cutting.

Please have a guardian cut parts off for mall children. The nippers are sharp to cut the runners. Please use them carefully without injuring yourself. The products are nippers for cutting plastic. They are not intended for use outside of plastic model making. Never use on steel wires or other hard materials that may chip or break the thin blades. Do not leave the nippers lying around and keep them in their cases after use, storing them out of reach of children under six years of age.

Marker style paint for Gunpla. Gundam Marker Basic Set. 6 colors included. GM06 Gundam Blue, GM07 Gundam Red, GM08 Gundam Yellow, GM11 Gundam White, GM22 Gundam Gun Metallic, GM21 Gray Brush Tip Marker (wipe off type) for panel line.

Marker style paint for Gunpla. Gundam Marker Fine Edge Set 1. 6 colors included. GM46 Gundam Red, GM47 Gundam Yellow, GM48 Gundam Black, GM50 Gundam Fluorescent Pink, GM51 Metallic Green, GM184 Gundam New White.

For complicated or delicate parts such as face or vernier thrusters. Before using, shake the marker with cap on so that the ball inside mixes the ink. Be careful when opening the cap in case the ink fills up the cap. Push the tip of the marker against a piece of paper for several times until the ink comes out. Do not push the tip too hard as the ink may drip. If the ink does not come out smoothly, repeat first and second steps.

Let an adequate amount of ink to cover the tip and apply on the surface with little pressure. Drawing with markers with pressure may result in unevenness of the ink. For a neat finishing, apply 1 coat only for each part. The ink may separate if not used for a while. In that case, put the cap on the marker and shake well. Then, push the tip against tissue paper and let the tissue paper absorb the ink. The marker is ready to use once the color of the ink looks evenly mixed.

Marker style paint for Gunpla. Gundam Marker Gundam Seed Basic Set. 6 colors included. GM40 Seed Red, GM41 Seed Yellow, GM42 Seed White, GM43 Seed Blue, GM44 Seed Gray, and GM45 Seed Dark Blue.

Gundam Metallic Marker Set 2. 6 Colors included. Includes GM172 Metallic Black (for body, equipment, frames), GM172 Metallic Blue (for body metallic), GM174 Metallic Yellow Green (for body, camera eyes and sensors), GM175 Metallic Orange (for body and psycho-frame), GM176 Metallic Pink (for body, mono-eye and sensors), and GM177 Shine Silver (for body, equipment, and frames).

Before using, shake the marker with cap on so that the ball inside mixes the ink. Be careful when opening the cap in case the ink fills up the cap. Push the tip of the marker against a piece of paper for several times until the ink comes out. Do not push the tip too hard as the ink may drip. If the ink does not come out smoothly, repeated first and second steps.
Let an adequate amount of ink to cover the tip and apply on the surface with little pressure. Drawing with markers with pressure may result in unevenness of the ink. For a neat finishing, apply 1 coat only for each part. The ink may separate if not used for a while. In that case, put the cap on the marker and shake well. Then, push the tip against tissue paper and let the tissue paper absorb the ink. The marker is ready to use once the color of the ink looks evenly mixed.

Gundam Metallic Marker Set. 6 Colors included. Includes GM151 Gundam Metallic Gold (for Gundam's antenna or duct), GM152 Gundam Metallic Silver (for blade of weapons), GM153 Gundam Metallic Blue (for blue colored body), GM154 Gundam Metallic Green (for Gundam's camera eyes), GM155 Gundam Metallic Red (for red colored body), GM20 Wipe Off Black (for enhancing panel lines).

Before using, shake the marker with cap on so that the ball inside mixes the ink. Be careful when opening the cap in case the ink fills up the cap. Push the tip of the marker against a piece of paper for several times until the ink comes out. Do not push the tip too hard as the ink may drip. If the ink does not come out smoothly, repeated first and second steps.
Let an adequate amount of ink to cover the tip and apply on the surface with little pressure. Drawing with markers with pressure may result in unevenness of the ink. For a neat finishing, apply 1 coat only for each part. The ink may separate if not used for a while. In that case, put the cap on the marker and shake well. Then, push the tip against tissue paper and let the tissue paper absorb the ink. The marker is ready to use once the color of the ink looks evenly mixed.

GM20 is a water-based brush type marker suitable for panel lining. Special water-based ink can be applied on painted surfaces as well. The excess ink can be wiped off with a cloth, cotton bud or tissue paper.

Marker style paint for Gunpla. Gundam Marker MSV Set. 6 colors included. GM185 MSV Dark Yellow, GM186 MSV Red Brown, GM187 MSV Dark Green, GM188 MSV Light Blue, GM189 MSV Brown Green, GM190 MSV Dark Gray.

Gundam Marker Real Touch Marker Set 1. Marker style paint for Gunpla. 5 colors plus shade-off marker. Includes GM401 Real Touch Gray 1, GM402 Real Touch Gray 2, GM403 Real Touch Blue 1, GM404 Real Touch Red 1, GM405 Real Touch Orange 1, GM400 Shade Off Marker.

Real Touch Markers are water-based, so it is possible to apply not only on unpainted plastic models, but also on surfaces that are painted with Gundam Marker, Mr Color, or Aqueous Hobby Color. Applying Real Touch Markers on surfaces that are coated with Top Coat Flat or Mr Super Clear Flat will give you a greater finish, however the ink from Real Touch Markers would stick to the surface more and the excess ink would become harder to wipe off, so it is recommended to apply less ink.

With the fine tip of Real Touch Marker, lightly draw around the outline and edges of a plastic model. With the fine tip of Shade Off Marker, blur the color by going back over the colored area. In addition, use the bold tip of Shade Off Marker to adjust the color depth. When you blur the colors, the ink may transfer onto the tip of the marker, so clean the tip by pressing down the marker against tissue paper. Paint with bold tip of the marker to color large area, and wipe off the ink with cotton swab or tissue before the ink dries. Shading can be applied by leaving the ink in the hollow, gaps, and other areas where the shadows would appear, for a sharper and more realistic appearance. Finishing with Top Coat Flat or Mr Super Clear Flat will give a more realistic finish.

• Real Touch Gray 1: Purplish-gray color for shading of white parts.
• Real Touch Gray 2: Gray color for shading of white parts and Gunpla.
• Real Touch Blue 1: For shading of blue parts, such as the chest of Gundam or Gouf.
• Real Touch Red 1: For shading of red parts, such as the body of Char.
• Real Touch Orange 1: For shading of yellow parts, such as the chest of Gundam.
• Shade Off Marker: For blurring of the ink of Real Touch Markers.

6 colors included.

• GM406
• GM407
• GM408
• GM409
• GM410
• GM400

30MF 30 Minute Fantasy model kit

From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Liber Archer"!

■ A starter set that includes the base "Silhouette" [body], as well as armor and weapon parts.

■ Includes a "Silhouette" [body] with the same form as the separately sold "30MF Liber Knight".

■ The "Silhouette" [body] allows for human-like flexible action and is suitable for any job.

■ By providing movable axes in the head and neck, it is possible to pose the chin in or the face out.

■ The shoulder joint has a carefully designed structure so that the body lines do not collapse even when posing boldly.

■ The movable axes in the chest, torso, and waist and the sliding mechanism at the base of the waist joint work together to achieve natural posing.

■ Includes armor and weapon parts to "job change" into "Liber Archer" by combining with the "Silhouette" [body].

■ Flexible movement is achieved by using a mechanism that attaches the shoulder and waist armor via a joint on the back.

■ The bowstring of the greatbow uses a special ultra-fine sticker with strong adhesive processing only on both ends. Metal parts are used for the arrow shafts to express texture.

■ The attribute of the "Element Core" is "Wind".

■ Different face design and coloring from the separately sold "Silhouette" and "Archer" from the Rozan Empire.

[Accessories]

■ Large bow x 1

■ Arrows x 1 set

■ Quiver x 1

■ Armor parts x 1 set

■ Hand parts x 1 set

■ Joint parts x 1 set

■ Metal parts x 1

■ Sticker x 1

Master Grade MG 1:100 scale model kit. The Gundam Vidar from Mobile Suit Gundam: Iron-Blooded Orphans is equipped with an updated Gundam Frame, and is commercialized under the supervision of Ippei Gyoube, who is in charge of mechanical design! 15+

The updated Gundam Frame expands the range of motion of the shoulder joint.
The Hunter Edges on the toes and heels can be deployed.
The armor and verniers on the back of the knees move in tandem with the movement of bending the legs.
The handgun is equipped with an "MG original gimmick" that evokes blowback movement.
The rifle magazine can be detached.
The burst saber comes with a blade part that reproduces the end shape when purged.
By selecting parts, you can recreate the cockpit in the activated and deactivated states of Alaya-Vijnana Type-E.

[Accessories]
Burst saber x 1 set
Rifle x 1
Handgun x 2
Figures x 2 types
Joint parts x 1 set
Hand parts x 1 set
Stickers x 2 types

Bandai Namco. Ages 6+.

It comes with a pedastal!

Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

30 Minute Sister. Bandai Namco. 15+. 30MS SIS-NOO Sourei [Color B]. Bandai Spirits 2025.

30 Minute Sister costume parts set 16, Fairy Costume with Color B torso parts and green hair parts. A variety of option parts such as ring parts, joint parts, etc. are included. This product includes special parts for "30 Minutes Sisters" series kits. Products other than "30MS Option Parts Set 16" are sold separately. Images are for illustrative purposes only.

Bandai Model Kit: Pokemon Pikachu. Standing battle pose. Ages 6+

Bandai Namco. 15+. Figurerise Standard Plastic Model Kit. Umamusume: Pretty Derby Silence Suzuka. Bandai Spirits 2025. This package contains one "Figure-rise Standard Umamusume: Pretty Derby Silence Suzuka" figure. The actual product may differ slightly from the images. The completed product in the image has been painted. Images are for illustrative purposes only.
A display base is included. Requires assembly. G part Made in China. All other parts Made in Japan.

Bandai Namco. Ages 6+. Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.