After bitter months of conflict, the factions have slowly started making scars from old wounds. Not every player has emerged victorious. Many have seen their luck run out, and only an intervention of Fate can save them. But Fate is anything but predictable. The Burning Man has arrived in Malifaux and set the skies aflame. His madness and chaos ripple out in great waves, and the very weave of Fate smolders. Some will unify against this light in the sky. Some will seize power for themselves. But none will go unchanged as Malifaux burns.

As a Malifaux Expansion, Malifaux Burns expands on the story, gameplay, and characters of Malifaux Third Edition, bringing new title cards for every master this side of the Breach! With the introduction of these Title cards, and an additional 40 new characters introduced to the world of Malifaux, you’ll be able to expand and customize your favorite crew like never before!

Keywords: Nightmare, Oni. Contents:

• Asami, Shintaku
• The Dreamer, Insomniac
• Lady Yume

The epoxy putty with a thousand uses in modelling D.I.Y and industry.

Milliput is the trade name for our epoxy putty. We produce five grades: Standard Yellow/Grey, Silver Grey, Superfine White, Terracotta, and the latest addition - Milliput Black. Each grade is presented in similar packs containing 2 x 56.7. sticks and the general instructions for preparation and usage are the same.

The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.

After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).

Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130C.

Shelf Life:
We recommend Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.

For the restoration of porcelain and other ceramics for the repair of antiques, objects d'art, Victorian dolls, picture mouldings, etc. For sculpting and modelling. For the repair of white domestic chinaware and for filling scores and dents in white domestic equipment e.g. washing machines, refrigerators, etc.

Milliput is the trade name for our epoxy putty. We produce five grades: Standard Yellow/Grey, Silver Grey, Superfine White, Terracotta, and the latest addition - Milliput Black. Each grade is presented in similar packs containing 2 x 56.7gm sticks and the general instructions for preparation and usage are the same.

The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.

After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).

Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130C.

Shelf Life:

We recommend Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years.

Allegiance: Court of Two. Contents:

• Binh Nguyen

You trainhop aboard the Silver Ferryman, chasin’ a dream or runnin’ from the past. What you find is a welcomin’ hand - white glove, stretched skin… and a fiddle player in the distance, playin’ a tune that’s awfully inviting. Makes you never wanna leave.

In Vagrantsong, a cooperative and story-driven boss battler, you will take on the role of a Vagrant trapped on a supernatural ghost train. Face off against ghosts lingering on the train (called Haints), adjust your playstyle with Skills and Junk acquired along the way, and uncover the secrets of the Silver Ferryman in this spooky and challenging adventure.

• 2-4 PLAYERS (CO-OP)
• 30 MINS/PLAYER
• AGES 14+

Armada uses a unique combination of multicoloured D10s and D6s for various tests throughout the game. Get all the dice you’ll need, including exclusive Armada D6 with a special icon!

The Trained Bands are the most common troops in the Shire Army. Many so-called Braves that are drafted to the Bands are not full-time soldiers, although they are better trained than some militias found elsewhere. They typically have padded leather armour and wooden shields or bucklers, and carry a variety of weapons.

Some Trained Bands are organised and equipped as light cavalry riding highly trained miniature aralez. Their primary mission is scouting and skirmishing, but on the battlefield they will harass the enemy with ranged fire and protect the army’s flanks, charging into melee if absolutely necessary.

Perhaps the most daring troops in a halfling army are the Ej Grenadiers. Using their mechanical-wings, these hot-blooded individuals swoop over the battlefield like huge birds of prey, raining down destruction with their firebombs before dropping into the midst of the chaos they have created to wreak more destruction.

16 7-card packs

Ticket to Ride® Play Pink is a fundraising charity project led by Days of Wonder and Asmodee to support research against breast cancer around the world. This is a full set of trains and stations to play Ticket to Ride and Ticket to Ride Europe with a new, unique pink color and a new shape of trains that come in a gorgeous tin box. This product is a limited edition. This product requires Ticket to Ride or Ticket to Ride Europe to use.

This expansion box serves up intermdiate-level play, building off the recent, best-selling release of Battletech: A Game of Armored Combat. This new box set contains everything you need for more advanced 'Mech on 'Mech action.

This expansion box serves up intermdiate-level play, building off the recent, best-selling release of Battletech: A Game of Armored Combat. This new box set contains everything you need for more advanced 'Mech on 'Mech action.

This expansion box serves up intermdiate-level play, building off the recent, best-selling release of Battletech: A Game of Armored Combat. This new box set contains everything you need for more advanced 'Mech on 'Mech action.

This expansion box serves up intermdiate-level play, building off the recent, best-selling release of Battletech: A Game of Armored Combat. This new box set contains everything you need for more advanced 'Mech on 'Mech action.

One hundred perfectly tight fitting inner-sleeves for standard gaming cards measuring up to 63x88mm (2.5 x 3.5 inches). Acid free ultra clear 60 micron polypropylene absolutely free of PVC. These sleeves will fit smoothly inside regular Dragon Shield card sleeves, offering the best possible protection for your cards.

Twenty multi-part Barbarian figures, designed to be used in Frostgrave, the Fantasy Skirmish Game. In The Forgotten Pacts supplement for Frostgrave, players lead their warbands into the northern reaches of the city, exploring the ruined temples of the Frozen City to search for the lost secrets of evocation - the art of summoning demons. While the lure of such knowledge is great, few wizards have ventured into this region as it is overrun by barbaric northern tribesmen who have descended from the hills in their own search for treasure. Marking themselves with demonic sigils, many of these barbarians have aligned with ancient powers discovered amongst the temples.

This box set of hard plastic figures allows you to build 20 different Barbarians to play in the game Frostgrave. To help you design the perfect Barbarian warband, the box set contains 20 bodies, loads of weapon/ arm variants, 40 heads and all sorts of Barbaric equipment. No two warbands should ever be the same!

Plus, the Barbarians are compatible with the Frostgrave Soldiers and Frostgrave Cultists, giving you even more potential for conversions.